BBN Weathering steel
Home / News

News

Measures to change the deformation of SPHC weathering steel plate

Measures to change the deformation of SPHC weathering steel plate

By studying the uniformity of deformation between racks and the uniformity of laminar cooling, it is analyzed that the main reason for the poor shape of SPHC weathering steel plates is the uneven cooling of laminar flow.

S355J2W steel welded joints have good mechanical properties

The microstructure of the weld zone of S355J2W steel welded joints air-cooled is composed of coarse columnar ferrite, network ferrite, acicular ferrite and a small amount of pearlite, and the microstructure of the heat-affected zone is composed of fine an

12mm thick S355J2W weathering steel welding process and impact test

The test material is 12mm thick S355J2W weathering steel, using MAG welding (melting electrode active gas shielded arc welding) multi-layer multi-pass welding process, the shielding gas is 80% Ar+ 20% CO2 mixed gas, the joint form is butt joint, V-shaped

Effect of Grain Size on Corten B Weathering Steel

For the Corten B weathering steel experiment, under the same corrosion environment and the potential difference between grain boundaries and grains, compared with samples with larger grain sizes, the k value of the sample with smaller grain size Smaller,

BBN Research on S355J2WP weathering steel Surface Rust Layer Technology

The requirements for environmental protection of steel structure buildings are increasing at home and abroad, and the surface treatment technology of S355J2WP weathering steel should also be developed towards environmental friendliness. Therefore, BBN pro

Treatment Technology of Surface Rust Layer of S355J2WP Weathering Steel

In the natural environment, S355J2WP weathering steel can use the protective and stable rust layer generated by itself to prevent further corrosion, so as to realize bare use, omit the traditional paint coating process, and maintain free in the later stag

Metallographic structure of A588 Grade A weathering steel plate

Metallographic structure of A588 Grade A weathering steel plate

The matrix structure of A588 Grade A weathering steel plate has a great influence on the corrosion performance, and the multiphase structure should be avoided as much as possible. The more uniform and single the structure, the better the corrosion resista

A588 Grade A weathering steel plate heating process

A588 Grade A weathering steel plate heating process

A588 Grade A weather-resistant steel plate refers to the addition of a small amount of alloying elements such as Cu, Cr, Ni, etc. to ordinary low-alloy steel, so that an amorphous oxide layer with a dense layer and strong adhesion to the base metal is for

Post-rolling stack cooling technology for Q235NH steel plate

When the stack cooling Q235NH steel plate is cooled from high temperature after rolling, the thermal stress caused by the inconsistency of the internal and external cooling rate is inconsistent with the internal and external phase transformation during th

Development of Composition of Q235NH Weathering Steel

P is also the most effective element in Q235NH weathering steel to improve the atmospheric corrosion resistance. Generally, it is not used alone, but combined with Cu, Cr and other elements to achieve better results.

 721   Home Pre 12 13 14 15 16 17 18 19 20 21 Next End

Technology

Contact Us

  • Address: Xichen Science & Technology Building High-tech Development Zone, Zhengzhou, China
  • Tel: 0086-371-86151827
  • Fax: 0086-371-86011881
  • Email: [email protected]
Looking for Corten A steel, Weathering steel plates? BBN Group is a good choice.
div style="display:none;">