BBN Weathering steel
Home / News

News

Precautions for installing the tower equipment

Precautions for installing the tower equipment

The equipment hoisting should take off and land steadily without any impact.
The installation of the tower equipment is required to be stable and firm, and the tower body must be vertical. In areas with strong wind, the tower body should be strengthened.

Two categories of tower equipment

Two categories of tower equipment

The plate tower equipment is equipped with a certain number of trays, and the gas contacts the liquid layer on the trays in the form of bubbling or spraying for material transfer. According to the gas-liquid operating state, it can be divided into bubblin

A detailed introduction to the tower equipment

A detailed introduction to the tower equipment

The tower equipment is a process equipment with a cylindrical welded structure, which is composed of a cylinder, a head (or cover) and a support. It is a non-standard equipment specially designed and manufactured for a certain production process requireme

Features and advantages of stainless steel spiral vane

Features and advantages of stainless steel spiral vane

Stainless steel spiral vane have strong durability, wear resistance and aesthetics. It can effectively prevent moisture and water penetration, and is not easy to rust, corrosion and oxidation resistance.

The material of the spiral vane and the advantages of the carbon steel spiral vane

The material of the spiral vane and the advantages of the carbon steel spiral vane

Screw conveyors are widely used and are often used for conveying materials, such as massive, granular, powdery and other materials, or some high-temperature and corrosive materials, instead of manual handling and higher efficiency. Common spiral blades in

What are the common causes of wear of spiral vane

What are the common causes of wear of spiral vane

In the running-in phase of the spiral vane, because the product is relatively rough, large friction will be generated at this time. The frictional force at this stage is great for the wear of the spiral vane. Users need to pay attention to this point.

Forged shaft process and heat treatment

Forged shaft process and heat treatment

Different forging methods have different processes. Among them, hot die forging has the longest process. The general sequence is: blank blanking; blank heating; roll forging blank preparation; die forging forming; trimming; punching; straightening; Interm

Optimized process and performance of forged shafts

Optimized process and performance of forged shafts

The forming of the forged shaft is produced under the action of external force. Therefore, the correct calculation of the deformation force is the basis for selecting equipment and checking the mold. Analysis of stress and strain inside the deformed body

Forging shaft processing procedures

Forging shaft processing procedures

Forging shaft is metal in solid state after heating through forging and pressing forming, it requires metal to have good thermoplastic, general forging shaft are steel parts, its high strength, plastic calculation and blanking is one of the important link

The characteristics and uses of steel grating plate

The characteristics and uses of steel grating plate

Steel grating plate is made of flat steel in accordance with a certain distance and twisted square steel cross arrangement, with pressure welding machine or artificial welding. The surface after hot dip galvanized or plastic spray treatment, so as to achi

 547   Home Pre 3 4 5 6 7 8 9 10 11 12 Next End

Technology

Contact Us

  • Address: Xichen Science & Technology Building High-tech Development Zone, Zhengzhou, China
  • Tel: 0086-371-86151827
  • Fax: 0086-371-86011881
  • Email: [email protected]
Looking for Corten A steel, Weathering steel plates? BBN Group is a good choice.
div style="display:none;">