Stainless steel sink size standard

The hole positions, the rear position, the middle position, and the lateral position are the best, so that the lower part of the cabinet has more space for use. The lateral position is second. The material, hardness and gloss are generally 301, 304, 430 stainless steel. 304DDQ stainless steel is the best. Lightweight, wear-resistant, high temperature resistant, aging resistant, and rust-free.

The thickness and overall stiffness of the stainless steel sink are generally 0.7 to 1 mm. Edges, thin edges, narrow edges, straight edges. Generally, the side height is less than 4mm, and the side width is less than 20mm, which is the best. It can make the table flat, prevent side leakage, and the effective volume of the basin is large.

The verticality of the basin wall of the stainless steel sink, the vertical basin bottom, and the arc angle. The vertical angle is the best, so that the effective area of ​​the basin bottom is large and easy to operate.
Depth, shallow, deep generally> 180mm is the best, deep basin, large washing capacity, splash water.
The most intuitive standard for flatness, quality and grade. Generally, it should be between +0.1mm, which is reflected in good processing accuracy and beautiful appearance.

Sewer pipe fittings and fittings are made of hard PP/PVC with the best precision. They have the same life span as the sink, preventing clogging and no water leakage.
Stainless steel sink drain, steel ball positioning, rubber extrusion, screw extrusion. The steel ball has the best positioning, convenient and fast water storage, and the water is automatically filtered.