EN 10025-3 S460NL Alloy steel plate material number is 1.8903. EN 10025-3 S460NL Alloy steel plate is in steel standard EN 10025-3.EN 10025-3 S460NL Alloy steel plate shall be suitable for welding,and general requirements for arc welding of the S460NL steel plate shall be given in EN 1011-2.
EN 10025-3 S460NL steel plate is hot rolled weldable fine grain structural steels in the normalized delivery condition, is especially intended for use in heavily loaded parts for welded structures such as bridges, flood gates, storages tanks, water supply tanks ect, for service at ambient and low temperatures.
EN 10025-3 S460NL Alloy steel plate Mechanical properties
Yield strength Mpa:370-460 Tensile strength Mpa:530-720
EN 10025-3 S460NL Alloy steel plate Chemical composition(%)
C≤0.20 Si≤0.60 Mn:1.00-1.70 P≤0.025 S≤0.020 Nb≤0.05 V≤0.20 Al≥0.02 Ti≤0.05 Cr≤0.30 Ni≤0.80 Mo≤0.10 Cu≤0.55 N≤0.025
EN 10025-3 S460NL Alloy steel plate Specification
Thickness: 6mm-350mm
Width: 1500mm-4200mm
Length: 3000mm-18000mm
Delivery Condition:S460NL+N/S460NL+AR/S460NL+M
Tests: HIC/ PWHT/ Z15 Z25 Z35/ Crack Detection
Impact Test:S460NL plateadopt not lower than -50 °Cimpact test .
Heat treatment
Normalizing,Annealing,Tempering,Quenching,Hardening and tempering,Seasoning,Surface hardening,Carburizing
Bebon steel always uphoid the purpose of mutural benefit,we always offer preferential price and comprehensive services of EN 10025-3 S460NL Alloy steel plate .If you place an order of EN 10025-3 S460NL Alloy steel plate to us,we will give you a satisfactory answer.
Hot ProductsMore+
If you have any need about our steel products, Please send email to [email protected] or leave a message to use this function. we will reply you ASAP!