S355J0WP steel chemical composition,S355J0WP steel mechanical property

Bebon steel can supply S355J0WP steel chemical composition,S355J0WP steel mechanical property price and specification ,we are steel suppliers and manufacturer,you can contact us to get S355J0WP steel chemical composition,S355J0WP steel mechanical property application and other informations.

S355J0WP steel plate
Steel Category: structural weathering steel
Steel grade: EN10025-5 S355J0WP 
Dimension: Thickness 2-460mm, Width 1500-3200mm, Length 6000-12000mm
S355J0WP Steel Description:
S355J0WP is a structural weathering steel which is also referred to as atmospheric corrosion resistant steel. The main alloying elements are chromium nickel and copper with added phosphorous which gives it excellent self protecting qualities. As the steel reacts with elements in the atmosphere, the material forms a layer of rust over time which in essence protects the steel from corrosion.
S355J0WP Steel Delivery state:
Hot Rolled, Cold Rolled, Normalized, Quenched, Tempering, Thermal Mechanical Control Process (TMCP), Electroslag Remelting Technical, HIC test.
S355J0WP steel chemical composition:

C %	Mn %	Cr %	Si %	CEV %	S %
Max 0.12	Max 1	0.3-1.25	Max 0.75	Max 0.52	Max 0.035
Cu %	P %	N %
0.25-0.55	0.06 - 0.15	Max 0.009

Method of deoxidation FN = rimming steels not permitted.
CEV=
For long products the P and S content can be 0.005% higher
The S355J0WP steels may show a Ni content of max. 0,65 %.
The max. value for nitrogen does not apply if the chemical composition shows a minimum total Al content of 0,020 % or if sufficient other N binding elements are present. The N binding elements shall be mentioned in the inspection document

S355J0WP  steel mechanical property:  

Grade	Min. Yield Strength Mpa						Tensile Strength MPa			Impact
S355J0WP	Nominal Thickness (mm)						Nominal Thickness (mm)			degree	J
Thick mm	≤16	>16 ≤40	>40 ≤63	>63 ≤80	>80 ≤100	>100 ≤150	≤3	>3 ≤100	>100 ≤150	0	27
S355J0WP	355	345	….	….	….	….	510-680	470-630	….

The tensile test values given in the table apply to longitudinal samples; in case of strip and sheet steel of widths of ≥600 mm they apply to transverse samples.
If S355J0WP mechanical properties have been significantly modified by heavy coldforming, either stress relief annealing or normalised may be applied. Normalised should also be applied following hotforming outside of the temperature range of 750 - 1.050 °C and after overheating.

BEBON,the most professional S355J0WP steel exporter,will offer you the the best S355J0WP steel.
If you have any order in S355J0WP steel from BEBON, please inquiry us soon.
TEL:0086-371-86151827,0086-371-86151527
FAX: 0086-371-86011881
Oficina Dir: 2801 B# International enteprise center Zhengzhou city in China.
Post Code: 450001
E-mail: [email protected]